To use your Tower Handheld Steam Cleaner:
- Ensure the steam cleaner is switched off and unplugged before filling the water tank.
- Remove the safety cap by turning it anti-clockwise.
- Using the supplied funnel and measuring cup, fill the water tank with water. Do not overfill the tank.
- Replace and securely tighten the safety cap.
- Attach the required accessory for the surface you are cleaning.
- Plug the steam cleaner into a suitable mains socket and switch it on.
- Allow approximately 3 minutes for the steam cleaner to heat up.
- Once heated, press the Steam button to release steam.
- Move the steam cleaner slowly over the surface you are cleaning.
- The steam cleaner can provide up to approximately 10 minutes of continuous steam.
- When finished, switch off and unplug the appliance.
- Allow the steam cleaner to cool completely before removing the safety cap or storing it.
Important: Never open the safety cap while the steam cleaner is hot or under pressure. Allow the appliance to cool completely before opening the cap and emptying any remaining water.
The Handheld Steam Cleaner comes with a range of accessories, including a fabric steamer, squeegee, nylon brush, angled nozzle and long nozzle adaptor, which can be used for different cleaning tasks.
If you need any further assistance using your Tower Handheld Steam Cleaner, please contact our Customer Service team.