Skip to main content

How to Clean the Roller and Charging Base on Your Self-Cleaning Hard Floor Cleaner

Updated

Regularly cleaning the roller and charging base helps maintain cleaning performance and prevent dirt build-up and unpleasant smells.

How to Remove and Clean the Roller

  1. Switch off the cleaner before removing any parts.
  2. Remove the brush guard: Press the brush guard release buttons and lift off the guard.
  3. Remove the roller: Press the roller lock button and pull the roller out sideways.
  4. Clean the roller: Use the supplied cleaning tool to remove hair and debris. Rinse the roller if needed.
  5. Refit the roller: Reinsert the roller and ensure it locks securely into place.
  6. Refit the brush guard: Make sure the guard is securely attached.
  7. Dry the roller: Use the charging base’s drying mode to dry the roller after rinsing.

Ensure the roller and all components are correctly fitted before using the cleaner again.

How to Clean the Charging Base

  1. Unplug the charging station before cleaning.
  2. Remove the cleaner from the station.
  3. Pour away any water remaining in the tray.
  4. Wipe the station and tray with a soft, dry cloth.

Important: Never immerse the charging station or the main body of the cleaner in water.