Always switch off, unplug and allow the steam mop to cool before filling or emptying the water tank.
- Remove the water tank and open the filler cap.
- Fill with water: Use tap water, or distilled water in hard-water areas. Do not use hot water.
- Do not overfill: The maximum water capacity is awaiting factory confirmation.
- Close the cap securely and refit the tank until it clicks into place.
- Use water only: Never add detergent, fragrance, descaler or other chemicals to the water tank.
- Empty after use: Remove any remaining water from the tank after each use to help reduce limescale build-up.
- Never run the steam function with an empty tank.
Always ensure the tank is correctly fitted before operating the steam mop.