If fabric remains wet after cleaning or a stain reappears as it dries, try the following steps.
- Avoid over-wetting: Use controlled amounts of water and avoid repeatedly spraying the same area.
- Position the upholstery brush correctly: Hold it at a slight angle so the front lip seals against the fabric.
- Use slow, overlapping passes: Move the brush steadily across the affected area.
- Extract excess moisture: Finish with two slow passes without pressing the trigger to remove remaining water.
- Treat stains that return: If a stain reappears as the fabric dries, extract the area again using Warm Water + Suction mode, repeat the dry passes and allow the fabric to dry with good ventilation.
Always check the fabric care instructions and test a hidden area before cleaning.